6 tph SZL biomass-fired boiler project for wood products industry

Wood processing is molding the wood under the action of a mould after being softened, bending the curve shape that the design requires, the following procedure is drying and shaping. In this case, wood cannot be heated and shaped by fire, therefore, heating and softening the wood by steam has been the only choice. Jiangsu Hongya Wood Industry Co., Ltd. is mainly engaged in producing, processing and selling wood and wood products. There are a mass of wood pellet and wood chip residuals during the processing; Hongya Wood has always been insisting on making good use of waste materials and using these wood residuals as boiler fuel. Due to the high moisture and low calorific value of the wood pellets and wood chips, the problems of low combustion efficiency, ash accumulation and abrasion are inclined to happen. The new generation biomass-fired boiler, which is designed and developed by ZOZEN, has optimized the design of the feeding hopper, the length and width of the fire grate, rotary speed of gearbox, 1st and 2nd air ratio, vapor orientation and position, etc; these methods not only take the lead in solving the above problems, but also ensure the full combustion and the thermal efficiency can reach up to 88%; in addition, ZOZEN biomass-fired boiler adopts appropriate heat resisting grate bars, which effectively improve the reliability of the boiler and ensure the stable running of the boiler for a long time.